单颗金刚石切削无氧铜的声发射关联维特征*

声发射技术可以实现无氧铜切削加工特征的监测与评价。采用声发射技术监测单颗金刚石磨粒旋转切削无氧铜，利用G-P算法重构出声发射时域信号相空间，采用自相关函数法计算出相空间时间延迟参数，通过相空间双对数曲线的计算，得到不同切削工况下的关联维数。研究结果表明，进给速度和切削速度对声发射信号影响较不显著，切深与声发射信号振幅呈正效应关系；声发射信号双对数曲线呈现阶段性增加趋势，并逐渐收敛于饱和状态，关联维数随着嵌入维数的增加先快速下降后趋于平稳；金刚石切削无氧铜的声发射信号具有混沌运动变化特性，在较小嵌入维数时，关联维数与切深和切削速度呈现线性负效应关系，与进给速度呈现线性正效应关系。该研究为无氧铜的切削加工提供理论参考。     

Switching of heating and cooling modes using thermal radiation films

We study emissivity (ε)-dependent radiative heat transfer phenomena in remote and contact configurations. To demonstrate the emissivity-dependent radiative heating mode in a remote configuration, we fabricated miniature greenhouses covered with low (0.34)- and high-ε (0.86) polyethylene films and monitored temperatures on the floors, insides, and covers of the greenhouses during 24 h. The high-ε greenhouse yielded a 9-°C increase in floor temperature relative to the low-ε greenhouse at a one-sun solar irradiance because the high-ε film effectively trapped floor radiation. In contrast, the cover temperature remained lower in the high-ε greenhouse due to intensified radiation released from the high-ε film. This self-cooling effect was more evident when an emissive film was in physical contact with an object. While bare copper heated up to 55 °C, a high-ε film coated copper substrate was kept cooler by 4 and 2 °C compared with the bare and low-ε film coated copper samples, respectively.     

Meshless acoustic analysis using a weakly singular Burton-Miller boundary integral formulation

The Burton-Miller boundary integral formulation is solved by a complex variable boundary element-free method (CVBEFM) for the boundary-only meshless analysis of acoustic problems with arbitrary wavenumbers. To regularize both strongly singular and hypersingular integrals and to avoid the computation of the solid angle and its normal derivative, a weakly singular Burton-Miller formulation is derived by considering the normal derivative of the solid angle and adopting the singularity subtraction procedures. To facilitate the implementation of the CVBEFM and the approximation of gradients of the boundary variables, a stabilized complex variable moving least-square approximation is selected in the meshless discretization procedure. The results show the accuracy and efficiency of the present CVBEFM and reveal that the method can produce satisfactory results for all wavenumbers, even for extremely large wavenumbers such as k = 10 000.     

Accurate correction of arbitrary spin fermion quantum tunneling from non-stationary Kerr-de Sitter black hole based on corrected Lorentz dispersion relation

According to a corrected dispersion relation proposed in the study on the string theory and quantum gravity theory, the Rarita-Schwinger equation was precisely modified, which resulted in the Rarita-Schwinger-Hamilton-Jacobi equation. Using this equation, the characteristics of arbitrary spin fermion quantum tunneling radiation from non-stationary Kerr-de Sitter black holes were determined. A number of accurately corrected physical quantities, such as surface gravity, chemical potential, tunneling probability, and Hawking temperature, which describe the properties of black holes, were derived. This research has enriched the research methods and enabled increased precision in black hole physics research.     

对史密斯-帕塞尔自由电子激光光栅的研究

为了研究史密斯-帕塞尔自由电子激光的输出频率和光栅槽深、光栅槽长、光栅槽宽的关系,对于基于矩形光栅的史密斯-帕塞尔自由电子激光利用粒子模拟软件进行模拟和理论分析。首先,利用粒子模拟软件模拟对于基于矩形光栅的史密斯-帕塞尔自由电子激光进行了研究,发现史密斯-帕塞尔自由电子激光的输出频率随光栅槽深、光栅槽长、光栅槽宽的增大而减少。接着,对史密斯-帕塞尔自由电子激光的光栅槽进行了理论分析,发现每个光栅槽都可以等效为一个LC谐振电路,并发现在史密斯-帕塞尔自由电子激光中存在两种辐射,一种是史密斯-帕塞尔辐射,另一种是LC振荡辐射。最后,对光栅槽的LC振荡辐射进行了估算,发现史密斯-帕塞尔自由电子激光输出频率的模拟值与光栅槽的LC振荡辐射估算值的数量级均为102 GHz,且变化规律上一致。据此推测决定史密斯-帕塞尔自由电子激光输出频率的应该是光栅槽,而不是谐振腔。     

Elastic,dielectric, and piezoelectric characterization of 0.92Pb(Zn1/3Nb2/3)O3-0.08PbTiO3 single crystal by Brillouin scattering

In this paper,a complete set of elastic,piezoelectric,and dielectric constants of high-quality tetragonal poled0.92Pb(Zn_(1/3)Nb_(2/3))O_3-0.08PbTiO_3 single crystal grown by the modified flux method is determined using high-resolution Brillouin scattering.A comparison is made between the results obtained by a hybrid method combining ultrasonic and resonant techniques and the results obtained by the Brillouin scattering.The elastic,piezoelectric,and dielectric constants obtained by the two methods are similar.The Brillouin spectrum consists of one longitudinal and two transverse acoustic phonon modes,and the variations of the Brillouin shifts,the full widths at half maximum,and the scattering intensities of these modes with scattering angle 9 are investigated.In particular,the transverse acoustic phonon mode at the lowfrequency becomes markedly soft from 28.2 GHz to 18.4 GHz and broadens gradually with the increase of θ,while its intensity decreases gradually as compared with that of the original one.The possible origins of the results are discussed.     

椭球粒子声辐射力计算及分析

针对水下椭球粒子,以声散射理论为基础,采用分波序列的方法,建立了椭球粒子声辐射力的理论计算模型。进而根据声辐射力计算公式,以刚性椭球粒子和液体椭球粒子为例,计算并分析不同Bessel波束作用下椭球粒子的轴向声辐射力函数特征。数值仿真计算结果表明,对于刚性椭球粒子,扁平椭球粒子相对于细长椭球粒子更有助于激发负声辐射力；对于液体椭球粒子,细长椭球粒子相对于扁平椭球粒子更加容易产生负声辐射力；对于不同介质的椭球粒子,不同的入射波束激发的负声辐射力的效果也存在明显的差异。该结果为复杂的尺寸和介质粒子声操控技术提供了理论的可行性。     

驻波声场中单分散细颗粒的相互作用特性

利用外加声场促进悬浮在气相中的细颗粒发生相互作用,进而引起颗粒的碰撞和凝并,使得颗粒平均粒径增大、数目浓度降低,是控制细颗粒排放的重要技术途径.为探究驻波声场中单分散细颗粒的相互作用,建立包含曳力、重力、声尾流效应的颗粒相互作用模型,采用四阶经典龙格-库塔算法和二阶隐式亚当斯插值算法对模型进行求解.将数值模拟得到的颗粒声波夹带速度和相互作用过程与相应的解析解和实验结果进行对比,验证模型的准确性.进而研究颗粒初始条件和直径对相互作用特性的影响.结果表明,初始时刻颗粒中心连线越接近声波波动方向、颗粒位置越接近波腹点,颗粒间的声尾流效应就越强,颗粒发生碰撞所需要的时间就越短.研究还发现,颗粒直径对颗粒相互作用的影响取决于初始时刻颗粒中心连线偏离声波波动方向的程度.当偏离较小时,颗粒直径越大,颗粒发生碰撞所需要的时间越短;当偏离很大时,直径较小的颗粒能够发生碰撞,而直径较大的颗粒则无法发生碰撞.     

Te溶剂Bridgman法CdMnTe晶体核辐射探测器的制备和表征

碲锰镉(CdMnTe)作为性能优异的室温核辐射探测器材料,可用于环境监测和工业无损检测领域。本文中采用Te溶剂Bridgman法生长In掺杂Cd_0.9Mn_0.1Te晶体,制备成10 mm×10 mm×2 mm大小的室温单平面探测器,研究了该探测器对²⁴¹Am@59.5 keV γ射线源的能谱响应。通过表征红外透过率、电阻率以及探测器能谱响应等参数,综合评定了探测器用CdMnTe晶体的质量、电学和探测器性能。结果表明,晶片的红外透过率均在55%以上,最好可达到60%。采用湿法钝化,100 V偏压下的漏电流由钝化前的9.48 nA降为钝化后的7.90 nA,钝化后的电阻率为2.832×10¹⁰ Ω·cm。在-400 V反向偏压下,CdMnTe探测器对²⁴¹Am@59.5 keV γ射线源的能量分辨率在钝化前后分别为13.53%和12.51%,钝化后的电子迁移率寿命积为1.049×10^-3 cm²/V。研究了探测器的能量分辨率随电压的变化特性,当偏压≤400 V时,探测器的能量分辨率主要由载流子的收集效率决定,而当偏压>400 V时,能量分辨率由漏电流决定。本文研究结果表明,Te溶剂Bridgman法生长的CdMnTe晶体质量较好,电阻率和电子迁移率寿命积满足探测器制备需求。